Yamaha CP300 Owner's Manual page 86

Settings for Song Recording and Playback—Song Settings
Parameters
Quantize
This allows you to correct the timing of notes you've
recorded. For example, if the timing of your performance
was slightly off in places, you can adjust the notes to precise
eighth or sixteenth notes. Changes made in Quantize affect
the entire Song.
A
Quantize
SwingRate= 50%
C
Changes the swing rate
Quantize timing settings (according to note value):
Off
Quarter note
1/4 .............
1/8 ............. Eighth note
1/12 ........... Eighth note triplets
Sixteenth note
1/16 ...........
1/24 ........... Sixteenth note triplets
If you select "1/8" or "1/16" for correction, the Swing Rate
parameter is shown (as a percentage value). Changing the
Swing Rate will make the Song sound more lively and give it
more of a swing or jazzy feel.
Setting range: 0% – 100%
If you select "1/8" for correction:
Your keyboard performance
Swing rate = 50%: No swing; straight
Swing rate = 75% (51% or higher): The timing of even beat
notes is slightly delayed.
Swing rate = 25% (49% or lower): The timing of even beat notes
is slightly early.
Swing rate = 67%: The timing of even beat notes is moved to
the third beat of the triplets.
Default setting: Off
86
CP300 Owner's Manual
B
Execute?-->
NO YES
1/8
D
Selects the notes for which
you can adjust the timing
Quick Play
This allows you to specify whether a Song that starts at a
point other than the first beat of the first measure should be
played from the first actual note or from the beginning of
the Song. (Some Songs are recorded with initial settings and
non-note data at the very beginning of the Song; this
parameter allows you to skip those settings and play the
Song from the first note. It also allows you to skip over rests
that naturally occur before the pickup note in a Song.)
A
QuickPlay
C
Settings:
On Playback from the first note
Off Playback from the start of the Song (including a rest
or blank measure)
Default setting: On
Channel Listen
This allows you to select and audition the recorded contents
of a single channel. Playback starts from the first note.
A
ChannelListen Start?-->
C
Setting range: Ch 1 – Ch 16
Default setting: Ch 1
n Song data consists of 16 channels. Each instrument part is
assigned to a specific channel, so for this instrument, the
words "channel" and "track" have the same meaning.
n Channels that do not contain any data are not displayed.
However, for some Songs, all channels (including the
channels that contain no data) may be displayed.
Channel Clear
This allows you to delete data of a single specified channel,
or of all 16 channels at once.
A
ChannelClear Execute?-->
C
Setting range: Ch 1 – Ch 16, ALL (all channels)
Default setting: Ch 1
n Song data consists of 16 channels. Each instrument part is
assigned to a specific channel, so for this instrument, the
words "channel" and "track" have the same meaning.
B
NO YES
On
D
B
NO YES
Ch1
D
B
NO YES
Ch1
D