Yamaha CP300 Owner's Manual page 66

Detailed Settings for MIDI Operations—MIDI Settings
MIDI Receive Parameter
This allows you to specify which types of MIDI data the
CP300 will receive and respond to.
A
ReceiveParameter
Note
C
Selects the type of data
Type of data: Note, Control, Program, AfterTouch, PitchBend,
SysEx (System Exclusive)
Setting range: On/Off
Default setting: On for all types of data
MIDI Transmit Parameter
This allows you to specify which types of MIDI data the
CP300 will transmit.
A
TransmitParameter
Note
C
Selects the type of data
Type of data: Note, Control, Program, AfterTouch, PitchBend,
SystemRealTime, SysEx (System Exclusive)
Setting range: On/Off
Default setting: On for all types of data
Transmitting the Default Settings on the Panel
This allows you to transmit initial panel setup data, such as
Voice selection and other settings, to a connected
sequencer. This is useful when you record performance data
to a sequencer, since it lets you take a "snapshot" of the
CP300 settings you want to use at the beginning of a
recorded Song and have those settings automatically called
up for you when you play back the Song.
A
InitialSetup
C
66
CP300 Owner's Manual
B
NO YES
On
D
Turns reception on or off
B
NO YES
On
D
Turns transmission
on or off
B
Start?-->
NO YES
D
Bulk Dump
You can transmit each setting data as the MIDI setting bulk
data.
A
BulkDump
Voice
C
Type of data:
Current The data is set on the panel
Performance The data saved to the Performance
Voice The Voice data saved using Voice Edit
MemorySong/ The Performance file, the data saved to the
Perf.File Song file.
ALL Send each bulk in sequence.
Default setting: Current
Bulk data cannot be transmitted in the following situations:
• Song record/playback
• Song recording standby
• When selecting recording tracks
• Demo Song playback
Bulk data cannot be received in the following situations:
• Song record/playback
• Song recording standby
• When selecting recording tracks
• Demo Song playback
• When transmitting bulk data
• When the message "Receiving bulk data has failed" appears
If the Performance file has 56 files, or the Song file has 112
Songs (1.4 MB), the data transfer will take at least 3 minutes if
you are using the USB connection, or 21 minutes if you are using
the MIDI connection.
n If you've changed the "Character Code" setting (page 84)
since naming a Song and the Song name does not display
correctly, bulk data cannot be transmitted.
n Press the B [– (NO)] button or [EXIT] button to cancel
the transmission.
CAUTION
Never attempt to turn off the power while bulk data is being
transmitted. Turning the power off in this state results in loss of
all user data.
B
Start?-->
NO YES
D