Yamaha CP300 Owner's Manual page 71

Equalizer Lock
This allows you to lock the Master Equalizer settings and
prevent them from being changed when selecting a
Performance, or by Song playback and incoming MIDI
data.
However, if bulk data (of the Current type) is received, the
Master Equalizer settings will be changed, no matter
whether the "Equalizer Lock" is turned on or off. (See Bulk
Dump in the MIDI Settings on page 66.)
A
EqualizerLock
C
Setting range: On/Off
Default setting: On
Memory Backup
This allows you to select specific items and parameters, such
as Voice selection and reverb type, to be automatically saved
upon shutdown, ensuring that they will not be lost when
you turn off the power to the CP300.
If the backup function is turned on for an item, the settings
for that item when power is turned off will be in effect the
next time power is turned on. If the backup function is
turned off for an item, the settings in memory are erased
when you turn off the power. In this case, when you turn
on the power to the unit, the default settings (the initial
settings) will be used. Refer to the "Factory Setting List" on
page 101.
Keep in mind that the backup settings themselves, the files
of the storage memory, and Character Code setting
(page 84) are always saved upon shutdown.
A
MemoryBackUp
Transpose
C
Selects the desired item
Setting for:
Master Master settings (page 53)
Transpose Transpose settings (page 69)
Equalizer Master Equalizer settings (page 72)
ReverbOnOff Reverb on or off (page 35)
SplitPoint Split Point settings (page 69)
Main/LeftVoice Voice, Keyboard part combinations
(page 27)
SongSetting Settings for Song recording and playback
(page 85)
MidiSetting MIDI Settings (page 63)
OtherSetting Other Settings (page 67)
Default setting: The Transpose, Main/LeftVoice and
OtherSetting parameters are set to Off. Other parameters are set
to On.
Factory Set
This allows you to reset the CP300 to its default settings.
• The "Character Code" parameter setting does not change
(page 84).
• The "Memory Backup" parameter setting (On/Off ) is
reset to the default setting (left column).
• You can specify whether the files in the storage memory
are erased or kept.
CAUTION
B
Never attempt to turn off the power during factory set. Doing so
NO YES
Off
could result in damage to the data.
D
A
C
Selecting for storage memory:
MemoryFileExcluded
MemoryFileIncluded
B
NO YES
Off
D
Selects on or off
Miscellaneous CP300 Settings—Other Settings
Resets the CP300
FactorySet Execute?-->
MemoryFileExcluded
Selects whether the memory files
are erased or kept
Memory Songs are kept.
Memory Songs are erased.
CP300 Owner's Manual
B
NO YES
D
71