Rear Panel - Yamaha CP300 Owner's Manual

Control Names and Functions
™ A to D [–][+] buttons
For selecting parameters and changing values while viewing
the display.
£ Display
For showing various messages and certain settings of the
instrument.
¢ [CONTRAST] knob
Adjusts the brightness of the display.
∞ [EXIT] button
Returns to the initial display (the display that first appears
when the power is turned on).
§ Voice group buttons
These let you select from sixteen groups of Voices, including
grand piano. You can also select a Performance if the
[PERFORMANCE] button is turned on.
¶ [VOICE EDIT] button
Enables selection of detailed settings of the sounds and effects.
• [SPLIT] button
Allows you to play different Voices on the left- and right-hand
sections of the keyboard.

Rear Panel

AC INLET
1
1 [AC INLET] jack
Connect the supplied AC power cord here. Use only the AC
power cord supplied with the CP300.
2 [ASSIGNABLE FOOT PEDAL] jacks
For connecting the included pedal (FC3), an optional FC4/5
foot switch, or FC7 foot controller.
3 MIDI [IN][OUT][THRU] connectors
For connecting external MIDI devices, allowing the use of
various MIDI functions.
4 [USB] connector
For connecting the CP300 and computer.
22
CP300 Owner's Manual
ª VARIATION [ ][ ] buttons
(page 15)
Enables selection of alternate Voices in the selected Voice
group.
‚ [REVERB], [CHORUS] buttons
(page 15)
These add ambience (Reverb) and depth (Chorus) to the
sound. You can turn the corresponding effect on or off with a
single touch.
(page 13)
⁄ MASTER EQ EDIT [ ][ ] buttons
Enables selection of detailed settings for the Master Equalizer.
(page 15)
¤ [SPEAKER] button
Switches the built-in speakers on or off.
‹ [CLICK] button
(pages 25, 40)
Switches the click function on or off.
› [MIDI SETTING] button
Enables selection of detailed MIDI settings.
(page 56)
fi [OTHER SETTING] button
This lets you make detailed settings, such as adjusting the
(page 31)
keyboard touch or making fine adjustments to the scale.
fl [MASTER EQUALIZER] sliders
These five sliders adjust the tone of each band: LOW (low
band) to HIGH (high band).
ASSIGNABLE FOOT PEDAL MIDI
1 2 3 4 IN OUT THRU
SUSTAIN SOSTENUTO SOFT AUX
2 3
5 OUTPUT [L][R] jacks
(page 11)
These jacks output balanced audio signals, and are for
connection to an external device such as a mixer.
6 OUTPUT [L/MONO][R] jacks
(pages 11, 33)
These jacks output stereo audio signals (1/4" mono phone
plug). For monophonic output, use just the L/MONO jack.
7 INPUT [L/MONO][R] jacks
(page 90)
External audio signals can be input via these phone jacks (1/4"
mono phone plug). The sound of an external instrument can
be reproduced via the CP300's speakers. Use 1/4" mono
phone plugs. For stereo input from an audio device, connect
to both the L/MONO and R jacks.
(page 92)
USB OUTPUT
R L
4 5
(page 25)
(page 35)
(page 72)
(page 52)
(page 38)
(page 64)
(page 67)
(page 36)
OUTPUT INPUT
R L/MONO R L/MONO
6 7
(page 88)
(page 88)
(page 89)