Re-Recording Track 1 - Yamaha Clavinova CLP-170 Owner's Manual

Recording Your Performance
5.
Play back the recorded performance.
Press the SONG [START/STOP] button to play back the
recorded performance.
When playback is complete, it automatically stops and the Clavinova
locates the top of the song. To stop playback in the middle of a song,
press the [TOP] button. You can also pause playback by pressing the
SONG [START/STOP] button. Playback stops when you press the
button.
When you turn off the power to the Clavinova, the recorded performance
data will be lost. If you wish to keep the recording, save the data using the
SaveToMemory parameter (page 48) or SaveToDisk parameter (CLP-170)
(page 49) in the File menu.

Re-recording TRACK 1

This section explains how to record again in case your performance was not satisfactory.
Procedure
1.
Select a voice or voices for recording, if necessary.
Repeat Step 2 on page 39 if you wish to change the previ-
ous settings.
Follow the procedure from Step 3 on page 39 to re-record.
The original performance data will be overwritten by new performance data.
40
CLP-170/150
NOTE
To erase recorded data from
a track, use the Channel
Clear parameter in the
"SONG SETTING" menu.
(See page 74.)