Assign The Song [Start/Stop] Function To The Pedal [Pedalstart/Stop]; Selecting A Type Of Auxiliary Pedal [Auxpedaltype]; Setting The Point At Which The Damper Pedal Starts To Affect The Sound [Halfpedalpoint]; Pitch Bend Range [Pitchbendrange] - Yamaha Clavinova CLP-170 Owner's Manual

Yamaha musical instrument owner's manual clp-170, clp-150
Hide thumbs Also See for Clavinova CLP-170:
Table of Contents

Advertisement

Other settings
Assign the SONG [START/
STOP] function to the pedal
[PedalStart/Stop]
TIP
If you assign the SONG START/STOP function to a
pedal and turn the function On, the pedal function
assigned to the pedal in the Voice Setting menu (pages
83 and 84) is disabled.
See the procedure on page 71.
A
C
Select a pedal to assign
the function.
Setting for:
Left, Middle, AUX
Setting range:
On/Off
Normal setting:
Off for all pedals
Selecting a type of auxiliary
pedal [AuxPedalType]
A pedal connected to the [AUX PEDAL] connector
may switch on and off differently. For example,
some pedals turn on the effects and others turn
them off when you press them.
Use this parameter to reverse this mechanism.
See the procedure on page 71.
A
C
Setting range:
Make, Break
94
CLP-170/150
Setting the point at which the
damper pedal starts to affect
the sound [HalfPedalPoint]
Here you can specify the point to which you must
depress the pedal (right, center, left, AUX) before the
assigned effect begins to be applied. (This setting
applies to effects that can be assigned to each pedal,
such as damper or sostenuto (
not affected by this setting.)
If the effect is an on/off type effect, this setting
B
specifies the point at which the effect will be
NO
YES
switched on/off.
D
Set to On or Off.
Setting range:
–2 (effective with the shallowest press) - 0 - +2
(effective with the deepest press)
Pitch bend range
[PitchBendRange]
This specifies the amount of change that can be
produced by the pitch bend function which
smoothly varies the pitch.
• This setting applies only to the manually-played
• This setting can be made in semitone steps.
• You can set the pedal function (page 83) to spec-
See the procedure on page 71.
B
NO
YES
D
Setting range:
0–+12 (Pressing the pedal will raise/lower the pitch
by 12 semitones [1 octave])
Normal setting:
–2
page 83
A
C
sound.
ify whether the pitch will be raised or lowered.
A
C
). Expression is
B
NO
YES
D
B
NO
YES
D

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Clavinova clp-150Clp-170pe

Table of Contents