Setting The Touch Sensitivity [Touchsense]; Setting The Right Pedal Function [Rpedal]; Setting The Center Pedal Function [Mpedal] - Yamaha Clavinova CLP-170 Owner's Manual

Setting the touch sensitivity
[TouchSense]*
This parameter enables determines the manner
and degree to which the volume level changes in
response to your touch on the keyboard (how hard
you play). Since the volume level of the harpsi-
chords and pipe organs do not change regardless of
how you play the keyboard, the normal setting for
these voices is 127. (See the setting range below.)
See the procedure on page 71.
A
C
In Dual mode:
A
C
Voice for editing (Voice 1 or Voice 2)
Setting range:
0 (softest) - 64 (largest changes in the level) - 127
(loudest and fixed)
Detailed settings for the voices [VOICE SETTING]
Setting the right pedal func-
tion [RPedal]
See the procedure on page 71.
A
C
Setting range:
Sustain
SustainCont
B
NO YES
Sostenuto
D
Soft
Expression
B
NO YES
PitchBend Up
D
PitchBend Down A function that smoothly lowers
RotarySpeed
Viberotor
Off
Normal setting:
SustainCont
Setting the center pedal func-
tion [MPedal]
See the procedure on page 71.
A
C
Setting range:
Same as "Specifying the function of the right
pedal," above.
Normal Setting:
Sostenuto
B
NO
D
ON/OFF switch type damper
Damper that sustains the sound
proportionately to how deeply
you press the pedal
Sostenuto (page 29)
Soft (page 29)
A function that lets you create
changes in dynamics (volume) as
you play
A function that smoothly raises
the pitch
the pitch
Change the rotational speed of
the JazzOrgan rotary speaker
(switch between fast/slow each
time you press the pedal)
Switch the vibraphone vibrato
on/off (switch on/off each time
you press the pedal)
No function
B
NO
D
CLP-170/150
YES
YES
83