Recording To A Specified Track - Yamaha PSR-I500 Owner's Manual

Recording Your Performance
5
Press the [ ] (Start/Stop) or [REC] but-
ton to stop recording.
When using a Style, you can stop recording also
by pressing the [INTRO/ENDING/rit.] button, and
then waiting until playback ends.
After recording finishes, "Writing!" appears indi-
cating that the recorded data is being stored, and
then the recorded track numbers in the display
will light.
NOTICE
• Never attempt to turn the power off when "Writing!" is
shown in the display. Doing so can result in a loss of
data.
6
To play back the recorded Song, press
the [ ] (Start/Stop) button.
NOTE
• When recording a performance with a Sample Voice,
keep in mind that the Sample Voice itself is not recorded.
For the performance to sound as you intended, you will
need to assign that sample to the keyboard (the same as
used when recording).
• If you fast forward or rewind during playback of a Song
using Sample Voices, the playback sounds differ from the
original recording.
Limitations while recording
• The on/off status of ACMP cannot be changed.
• Playback cannot be changed between Style and
Riyaz.
• The Riyaz number can be changed while the Style
number cannot.
• When you use Style/Riyaz, the following parameters
cannot be changed: Reverb Type, Chorus Type, Time
Signature and Style/Riyaz Volume.
• Performances with a Split Voice cannot be recorded.
• The audio input from an external device (playback
sound on the connected computer or audio device)
cannot be recorded.
• Performances using Sample Voices can be recorded
on track 1 only.
38
PSR-I500 Owner's Manual
or

Recording to a Specified Track

This section explains how to record to a specified
track. This is useful when you want to record addi-
tional performances to an already recorded Song, or
re-record only one track of an already recorded
Song.
1
Press the [SONG] button, and then select
the desired User Song from 061–070
(User 1–10) as the recording target.
2
While holding down the [REC] button,
press the desired Track button to enter
the Record Ready mode.
User 1
pEC
Flashes
 If you want to record only the melody:
While holding down the [REC] button, press
one of the [1/RIGHT]–[5] buttons.
Press and
hold
 If you want to record only the Style play-
back:
Press the [STYLE] button, select the desired
Style, then simultaneously hold down the
[REC] button and press the [A] button. ACMP is
automatically turned on.
Press and
hold
User 1
061
001
Selected track
flashes