AEG SURROUNDCOOK BES331010M User Manual page 54

11.3 How to use: Aqua Cleaning
This cleaning procedure uses humidity to
remove remaining fat and food particles from
the oven.
Step 1 Pour water into the cavity embossment:
300 ml.
Step 2
Set the function:
Step 3 Set the temperature to 90 °C.
Step 1 Turn off the oven and wait until it is cold
to clean it.
Remove the shelf supports.
Step 2 Grab the grill corners. Pull it forwards
against the spring pressure and out of
two holders. The grill folds down.
Step 3 Clean the oven ceiling with warm water,
a soft cloth and a mild detergent. Let it
dry.
Step 4 Install the grill in the opposite sequence.
Step 5 Install the shelf supports.
11.5 How to remove and install:
Door
You can remove the door and the internal
glass panels to clean it. The number of glass
panels is different for different models.
WARNING!
The door is heavy.
Step 1 Fully open the door.
Step 2 Fully press the clamping levers (A)
on the two door hinges.
Step 3 Close the oven door to the first opening position (approximately 70° angle). Hold the door at both
sides and pull it away from the oven at an upwards angle. Put the door with the outer side down on
a soft cloth on a stable surface.
54 ENGLISH
.
Step 4 Let the oven work for 30 min.
Step 5 Turn off the oven.
Step 6 Wait until the oven is cold. Dry the cavi‐
ty with a soft cloth.
11.4 How to remove: Grill
WARNING!
There is a risk of burns.
CAUTION!
Carefully handle the glass,
especially around the edges of
the front panel. The glass can
break.
A
A