Medisana PSB Manual page 23

3.5
Weighing and
measuring body fat,
water content and
muscle mass
NOTE
Reliable measurements can only be achieved under certain
circumstances, as described in "2.4 Prerequisites for correct
measuring results", p. 14 - 15.
Place the scales on a firm, hard surface. All four feet must be in contact
with the floor.
1. Press the ON button
switch on the scales. "0.0 kg"
appears on the display.
2. Select your personal memory
location (1 - 12) by pressing
the UP button and/or
DOWN button .
3. Press the ON button
confirm the selection. Your
personal store data are
displayed; then "0.0 kg"
appears again on the display.
4. Step onto the scales with bare
feet and stand still. The scales
will switch off automatically to
save the batteries if you have
not stepped onto the scales
within approx. 36 secs. First of
all your weight is shown for
approx. 8 secs. At the same time,
the symbol flashes which
shows that the body fat value,
the water content and the muscle
mass are being measured.
5. The measured values for body
fat, water content and muscle
mass are shown on the display
one after another for
approx. 5 secs each followed
by the value determined for
the daily calorie intake.
The display sequence of the measured values is repeated. Then the scales
switch off automatically. Step down from the scales.
3 Operating
to
to
GB
19