Store Operations; Turning Arpeggio/Seq On And Off; Using The Arpeggiator; Arpeggiator On/Off - Yamaha AN1x Owner's Manual

Store Operations

The [STORE] switch is used for performing Voice
Store operations.
DEMO
PORTAMENTO
STORE
For information about performing a Voice Store operation,
see page 98.
For information about types of data stored in a voice, see page 9.
For information about Scene-related Store functions, see page 21. For information
about SEQ Store, see page 46.
Turning ARPEGGIO/SEQ
On And Off
The [ARPEGGIO/SEQ] switch is used to turn the
Arpeggiator or Step Sequencer on and off. Either
"ARP" or "SEQ" will appear in the LCD to
indicate which one is active for the voice,
determined by the Common Arp/SEQ setting in
the VOICE ARPEGGIO/SEQ menu.
DEMO
PORTAMENTO
STORE ARPEGGIO/SEQ
For information about the Arpeggiator, see page 33. For information about the
Step Sequencer, see page 37. For information about the Arp/SEQ setting, see
page 85.
LAYER
ARPEGGIO/SEQ
LAYER

Using The Arpeggiator

The Arpeggiator lets you play arpeggiated chord
patterns at the simple press of a key. There are
30 arpeggio pattern Types to choose from.
Between the 10 Arpeggio Subdivide (timing
resolution) settings, Play Effect Velocity
parameter and number of notes played, you
have a wide range of control and customization
over length, rhythm and feel of a voice's
arpeggio.
Common
Arp /SEQ Type/No KbdMode Hold
You can control which Scene plays the arpeggiated
patterns, turn the Arpeggio Hold function on and off at
will, and even designate an independent MIDI channel on
which to output the Arpeggiator pattern data.
The specific Arpeggiator-related parameters are available
in the VOICE ARPEGGIO/SEQ menu, but a few others will
also have a bearing on your arpeggiated performances,
including Tempo and Poly mode settings, and depending
on Layer mode, the Split Point assignment as well.
For information about each VOICE ARPEGGIO/SEQ menu parameter, see page 85.

Arpeggiator On/Off

The Arpeggiator can only be activated when the Arp/SEQ
parameter (VOICE ARPEGGIO/SEQ menu) is set to
"Arpeggio".
Common
Arp /SEQ Type/No KbdMode Hold
You can turn the Arpeggiator on and off by pressing the
[ARPEGGIO/SEQ] switch. When the Arpeggiator is turned
on, "ARP" will appear in the lower right area of the LCD.
33
MIDI Arpeggio Play EF VOICE
SceneSw Ptn Tx Ch Subdivide Swing Velocity GateTime ARPEGGIO / SEQ
VOICE
MIDI Arpeggio Play EF
SceneSw Velocity ARPEGGIO / SEQ
Ptn Tx Ch Subdivide Swing GateTime