Yamaha AN1x Owner's Manual page 80

EF Bypass
(Effect Bypass)
Effect Bypass settings let you bypass specific effects,
which is convenient when creating an original voice.
Bypassed effects will not be applied to the original
sound, and when the EF Bypass is "off", the signal will
flow through all effects units.
You can choose to bypass all effects, or only Delay
and Reverb, or only Reverb. Since EF Bypass is a
system parameter, it will not be saved as voice data,
and therefore will remain as you set it regardless of
which voice is selected.
Settings:
off: Turns off the Effect Bypass, so the signal flow will bypass
the effects units.
OnlyRev: Only the Reverb effect will be bypassed.
Only Dly: Only the Delay effect signal will be bypassed.
Dly&Rev: Both Delay and Reverb effects will be bypassed.
AllEF: The signal bypasses all effects in the Effect block,
including Variation Effect, Delay and Reverb (excluding EQ).
Effect Bypass Mark
The Effect Bypass mark will appear in the LCD when the
Effect Bypass is active.
Name
Name parameters let you select a voice Category and
up to ten characters to give a customized name to your
edited voice. There are two parameters, Cursor and
Char (Character).
Cursor
The Cursor parameter lets you position the cursor at the
voice Category field or any of the ten character fields
for the voice name.
Char
(Character)
The Character parameter lets you select a voice
Category (when the cursor is positioned at the voice
category field) or a character (when the cursor is
positioned at a voice name character field).
Character
Available characters:
ABCDEFGHIJKLMNOPQRSTUVWXYZ"abcdefghijklmnop
qrstuvwxyz0123456789*_!"#$%&'()+,-=
80
Cursor
(space)