Store; Voice Store - Yamaha AN1x Owner's Manual

Store

Store lets you perform Voice Store or Scene
Store operations.
Voice 1-128
Scene1
Scene Setup

Voice Store

Parameters
• Layer Mode
• Portamento On/Off
• Arpeggiator/Step Sequencer On/Off
• Voice Common Parameters
• Voice Pattern Parameters
• Free EG Parameters
Voice Store
The Voice Store operation lets you store edited voice data
(including Scene 1 and 2 settings) to any memory location
(1 ~ 128).
When you perform a Voice Store operation, the original voice data in the memory
location will be overwritten, so be sure to save all important voices beforehand to
an external MIDI data storage device such as the Yamaha MDF2 MIDI Data Filer.
You can recall all factory voices at any time (see page 100).
To change the name of an edited voice, see the Name function in the VOICE
COMMON menu, page 80.
1. After editing a voice (the EDIT mark will be
displayed in the LCD), press the [STORE]
switch. The STORE mark will display in the
LCD.
DEMO
PORTAMENTO LAYER
STORE ARPEGGIO/SEQ
2
2. Enter a number (1 ~ 128) using the
PROGRAM CHANGE keypad representing
the location in which you want to store the
edited voice, followed by [ENTER], or select
the location with [-] / [+]. The voice name
flashes alternately with "HIT[STORE]".
Step 2 can be omitted if you want to store the voice to the same location
number. In such a case, go straight to step 3.
3. Press the store switch again.
"SURE?[Y/N]" appears in the LCD.
If a User Pattern has been edited, "All Ptns?[Y/N]" appears in the LCD. To
overwrite all User Patterns, press [YES/ENTER]. To cancel the operation, press
[NO].
4. Press [YES/ENTER] to execute the Voice
Store operation. The LCD then returns to
the normal voice name and number
display.
After steps 1-3, pressing [NO] will cancel the Voice
Store operation, and the LCD will display the
previously selected voice name and number.
When you execute a Voice Store operation, Scene 1 and Scene 2 on/off status,
Layer mode setting, ARPEGGIO/SEQ on/off status, Portamento on/off status,
and all other voice parameters are stored to the designated voice number.
If you already know which location you want to store the voice in, simply enter
the number in the PROGRAM CHANGE keypad and press the [STORE] switch.
98