Verify That The Network Is Functional; Run Get_Ci_Status; Run Ifconfig --A; Ping The Sci Adapter Cards - Sun Microsystems Sun HPC 3.0 Manual

4
CHAPTER

Verify That the Network Is Functional

Perform the steps described below to verify that the SCI network functions correctly.

Run get_ci_status

Execute get_ci_status on all cluster nodes to verify interconnectivity.

Run ifconfig --a

Execute ifconfig -a to verify that all the nodes are up with the SCI daemons
running.

Ping the SCI Adapter Cards

Ping each SCI network interface, using their IP addresses. This verifies that every
network interface can be reached from a single point in the network.
31