Sun Microsystems Sun HPC 3.0 Manual page 4

ClusterTools 3.0 Software Must Be Installed 18
Caution for NIS+ Users 18
Create a Temporary Network Map for Later Reference 19
Create sci_config.hpc 20
SCI Configuration Templates 20
Editing a Configuration Template 20
Propagate the SCI Configuration 28
Run sm_config 28
Compare sm_config Output With Contents of sci_config.hpc 28
Verify the Rank of the SCI Interface 29
Add Variable to sci.conf File 29
Reboot Nodes 29
4. Verify That the Network Is Functional
Run get_ci_status
Run ifconfig --a 31
Ping the SCI Adapter Cards 31
Do All-to-All Ping 32
Check for RSM Daemon 32
Verify Basic Communication Functionality 32
5. Adding or Replacing SCI Adapter Cards 33
Install/Replace SCI Adapter Card 33
Connect New Adapter Card to Network 34
Create a Temporary Network Map 34
Run sciconf 34
Update sci_config.hpc 35
Run sm_config 35
Confirm sci_config.hpc Contents 36
Reboot the Node 36
Sun HPC 3.0 SCI Guide ♦ June 1999, Revision A
iv
31
31