Yamaha CDR-HD1500 Owner's Manual page 54

You can erase the data recorded on a CD-RW disc. New recordings can be made in tile space created by erasing. Tile fi)llowing four lypes of
erasing are possible with this unit.
ERASE
ERASE _/uu
u_Imi
• Erasing last tracks
This operation erases the last track on a disc. "Last Track Erase"
cannot be perfornled if a CD-RW disc has been finalized, or only
one track has been recorded on the disc.
1 • Set a not-finalized CD-RW disc in the disc tray, then
press ERASE.
"Erase Last '?" appears on tile display.
+.., +.,,, ,,,..,,, .,,,, + ,,,..,,, ,I, ., +
Go to the next step when erasing only the last track. To erase
two or more tracks, rotate the MULTI JOG knob (press +_, •
or • on the remote control) to specily the track number (to start
erasing from).
i..,. i "::a .:::" ::::"
F
Track to start erasing from Last track
To cancel erasing, press :2.
2,
Press E>/DD t o start erasing.
"Erasing" liashes on the display, and the level meter shews tile
erasing progress.
• Erasing all tracks
This operation erases all tracks recorded on a CD-RW disc. TOC
will be erased also if a CD-RW disc has been limdized.
1. Set a CD-RW disc in the disc tray, then press ERASE
repeatedly until "Erase ALL ?" appears on the
display.
u .... .-.. u u .-., ,_,
h. h... -..- .-. u=u u ..
To cancel erasing, press D.
2. Press E>/nn to start erasing.
"Erasing" flashes on tile display, and the level meier shows Ihe
erasing progress.
• Erasing TOC
This operation erases TOC (Table of Contents) data from a finalized
CD-RW disc. Alter erasing TOC data, you can record another track
data onto tile CD-RW disc.
1 • Set a finalized CD-RW disc in the disc tray, then
press ERASE.
'+Erase TOC ?" appears on the display.
.'.'.'7 ........... ":".', .'. .", - c
..... m u,I u,.
To cancel erasing, press D.
2.
Press E>/nn to start erasing.
'+Erasing" flashes on tile display, and the level meier shows tile
erasing progress.
Tile TOC indicator turns oil when "TOC Erase" has been com-
pleted.
48