Selectinga Targetdisc; Setting The Hdd Copy Mode - Yamaha CDR-HD1500 Owner's Manual

iZ'_o] ".,,11,'I I _[=']1;I ;[o] Lv_ Nr,_Io.]00Xs] _ II I_o]l II; I=11 _ IH n
• Selectinga targetdisc
MULTI JOG
• Setting the HDD copy mode
In the HDD copy mode, you can specil}' the number of tracks to be
copied on the HDD.
Initial setting: All Synchro
MODE MULTIJOG
ENTER
-GROUP SKIP buttons
While this unit is in the HDD copy standby mode, rotate
the MULTI JOG knob (press +/-, GROUP SKIP buttons, •
or •) to select the disc number to where the data is
copied.
\_['/"" "" "" 'J ..If[ 'J "
: = ' ' ' i h,b m,,_ =:,,= _ _"
_1=:,, = =:,,= ',,,= .L .L =:,,='=:,,=
/ \
Disc number to make the copy on
When a disc number with recorded tracks is selected, new
recordings will be added to the end of the last track that has been
previously recorded.
=
11
Press MODE while this unit is in the HDD copy
standby mode (P.26, 27).
You can select the copying mode.
Rotate the MULTI JOG knob (press +/-, • or • on the
remote control) to select the copying mode.
Choose one of the modes listed helow.
All Synchro (All-synchronized copying mode)
This mode copies all of the material from a single audio source
at the same time as the source programs are being played.
Track markers are automatically placed between the tracks
being recorded.
Multi Synchro (Multi-synchronized copying mode)
This mode copies the set number of tracks at the same time as
the source programs are being played. The number of tracks to
be recorded can be set in the range of 1 to 99 tracks. This mode
is convenient to record a mix of tracks from dilfcrent sources.
28