Getting Started - Yamaha AV-S70 Owner's Manual

Checking the Package Contents
Check that the following accessories are included in the package.
Remote control
Readying the Remote Control
Inserting the batteries
1
Remove the battery compartment cover.
2
Insert the four batteries (AAA, R03, UM-4 type)
with + and – oriented properly.
3
Close the battery compartment cover.
2

GETTING STARTED

Batteries (AAA, R03, UM-4 type)
Velcro strips (2 sets)
Misuse of dry cell batteries may result in leakage or
bursting. Be sure to follow the precautions given below.
• Insert batteries with (+) and (–) oriented according to the
marking in the battery compartment.
• Do not mix old and new batteries.
• Do not mix different types of batteries as they may offer
different voltage and performance even though they have
the same shape.
• Remove all batteries when they can no longer be used or
when the remote control will not be used for an extended
period.
• Do not use rechargeable batteries.
• If leakage occurs, wipe away all battery fluid inside the
compartment.
Preserving the manufacturer code
Replace batteries early before they become unusable.
The manufacturer code set by the user will be preserved
for about two minutes when batteries run out or when
they are removed. Note that the manufacturer code
setting may be lost if more than two minutes elapses.
Audio connection cord (2 pin, 3m)
Connection guide
Precautions regarding batteries