Yamaha AV-S70 Owner's Manual page 14

CONNECTIONS
Connecting a TV (monitor) to enjoy digital audio
Connect one
of these
Optical fiber cable
(EIA standard)
(commercially
available)
Connect the optical terminal or coaxial terminal of the LD or DVD player to the DIGITAL 1 (optical) terminal or DIGITAL 2
(coaxial) terminal of the front speaker unit using a commercially available optical fiber cable or audio connection cord
(1 pin).
Notes
• You need to make digital connection between this unit and your component to enjoy a Dolby Digital source.
• The audio of the LD or DVD player can be heard from the front speaker unit, but not from the TV speakers. The audio of the LD or DVD
player cannot be heard when the front speaker unit's power is turned off.
• If your LD player has a Dolby Digital RF signal output terminal, be sure to use the RF demodulator (separately purchased).
• No sound will be heard when connecting your LD player's Dolby Digital RF signal output terminal directly to this unit's DIGITAL 2
terminal.
12
Front speaker unit
DIGITAL 2
( /PCM)
AUX
L
R
Audio connection cord (1 pin)
(commercially available)
COAXIAL DIGITAL
OPTICAL DIGITAL
SUBWOOFER
DIGITAL 1
( /PCM)
THROUGH
TV VIDEO
OUT
SYSTEM
CONNECTOR
TV (monitor)
VIDEO IN
VIDEO OUT
OUTPUT
DVD player, LD player, etc.
Anti-dust cap
Anti-dust cap
Remove the cap covering the DIGITAL 1
terminal (optical) when connecting an
optical fiber cable. Safely store the cap
and always re-insert it in the terminal
when the terminal is not in use. (This cap
prevents the entrance of dust.)