Operation; Operating The Unit - Yamaha AV-S70 Owner's Manual

OPERATION

Enjoying the Home Theater Sound System
This section describes how to select audio output from A/V component such as a TV, VCR, or DVD, LD, CD player, or MD
recorder as input source to the Home Theater Sound System AV-S70 and how to adjust levels.
First turn on the playback component and the TV, and then follow the steps given below.
1 2
1
Press POWER (or p on the remote control) to
turn on the power.
Front panel
If the STANDBY indicator is lit, turn on the power
using p on the remote control. If the main power is
off (when the STANDBY indicator is not lit), turn on
the power by pressing POWER on the front speaker
unit.
2
Press the INPUT selector button.
Each time the button is pressed, the input source will be
switched in the order: VIDEO
DIGITAL 1 DIGITAL 2.
Front panel

OPERATING THE UNIT

3
or
Remote control
TV AUX
or
Remote control
1
3
3
Adjust the level using VOLUME +/– (or VOL +/–
on the remote control).
Pressing VOLUME + (or VOL + on the remote control)
increases the level, while pressing VOLUME – (or
VOL – on the remote control) decreases the level.
Front panel
2
or
Remote control
17