Using The Remote Control - Yamaha AV-S70 Owner's Manual

DSP PROGRAM (DIGITAL SOUND FIELD PROCESSOR EFFECT)
Enjoying DSP Programs
DSP selector button
Press the DSP selector button (on the front
speaker unit) or DSP (on the remote control).
Front panel
Each time this button is pressed, the DSP program will
be selected in the following order and the currently
selected DSP program name will be displayed.
When only the front speaker unit is connected:
VIRTUAL SURROUND
When the front speaker unit and a YAMAHA
subwoofer and rear speakers NX-SW70 are
connected:
VIRTUAL SURROUND
DSP OFF
MONO MOVIE
SPORTS
CONCERT
Notes
• The option "DSP OFF" only appears when using the DSP selector
button on the front speaker unit.
• Be sure to select the DSP program best suited for the atmosphere
of the source being listened to.
• The last DSP program used for each input source (AUX, TV,
VIDEO, DIGITAL 1, and DIGITAL 2) is stored in memory so
that the DSP program is automatically selected when the input
source is selected.
20
or
Remote control
MONO MOVIE
DSP OFF
DOLBY DIGITAL/
DOLBY PRO LOGIC
DOLBY DIGITAL ENHANCED/
DOLBY PRO LOGIC ENHANCED
DIGITAL MOVIE THEATER/
70 mm MOVIE THEATER
To cancel sound field effects

(using the remote control)

Press DSP ON/OFF.
Ordinary stereo reproduction will result and "DSP
OFF" will be displayed when the sound field effect is
canceled. Pressing this button again will cause the
sound field effect to return.
Processing indicators
A processing indicator will light to show with the type of
input signal when reproducing a source using a DSP
program.
q DIGITAL:
Lights when reproducing a source
encoded with Dolby Digital other than
2-channel.
VIRTUAL and SURROUND:
Lights when using VIRTUAL
SURROUND DSP program.
q PRO LOGIC: Lights when reproducing a source
encoded with Dolby Digital 2-channel,
PCM or an analog source using DSP
program No. 2 or 3.
DSP: Lights when reproducing a source using
DSP program No. 3 through 7.
Notes
• The VIRTUAL SURROUND, DOLBY DIGITAL/DOLBY PRO
LOGIC, DOLBY DIGITAL ENHANCED/DOLBY PRO LOGIC
ENHANCED, DIGITAL MOVIE THEATER/70 mm MOVIE
THEATER DSP programs are optimum for reproducing visual
software encoded with Dolby Digital that displays the g or
s logo marks.
• The volume level of the right and left main channels may differ
based on the input source being used because, except in the case
of Dolby Digital, sound field data as actually measured are used.
• Select the DSP program that you feel sounds best for a source
regardless of its name.
y
• Be sure to minimize the volume level of the TV to maximize the
virtual surround effect when reproducing a source with the
VIRTUAL SURROUND program.
• Refer to the glossary on page 28.
DSP ON/OFF
DSP