Table of Contents
Advertisement
INX***DH-F199-B30-***,INY***DH-F199-B30-***
Installation
3
Installation
3.1
Instructions for Mechanical and Electrical Installation
Observe the following instructions to ensure safe operation of the inclination sensor:
Warning!
Work must only be performed by trained and qualified personnel.
Commissioning and operation of this electrical equipment must only be performed by trained
and qualified personnel. This means individuals who are qualified to commission (in
accordance with safety technology), connect to ground, and label devices, systems, and
circuits.
Warning!
Only perform work when the system is in a de-energized state.
De-energize your device before performing work on the electrical connections. Short circuits,
voltage peaks, and similar events can lead to faults and undefined statuses. This presents a
significant risk of personal injury and property damage.
Warning!
Check electrical connections before switching on the system.
Check all electrical connections before switching on the system. Incorrect connections present
a significant risk of personal injury and property damage. Incorrect connections can lead to
malfunctions.
Caution!
Do not remove the housing.
Do not remove the sensor housing under any circumstances, as damage and contamination
can occur as a result of taking improper action.
Caution!
Do not perform any electrical modifications.
It is not permitted to perform electrical modifications on the inclination sensor. If you open or
modify the device yourself, not only are you endangering yourself and others but you will also
void any warranty and absolve the manufacturer of any liability.
Do not allow the inclination sensor to fall or be exposed to mechanical load.
Do not make any alterations to the housing of the inclination sensor.
8
Advertisement
Table of Contents
