Clean - Panasonic ES-RT84 Manual

Clean

Cleaningusingtheself-cleaningrecharger
►Preparingtheself-cleaningrecharger

Remove the shaver and the appliance plug from the
self‑cleaning recharger.
1
1
Placetheself-cleaningrechargeronahard,flat
surface.
• When the self‑cleaning recharger is lifted, or on
the soft surface such as carpets, the lock release
lever will not fit in the recharger properly. In that
case, the cleaning liquid unit cannot be removed.
2
2
Pressthecleaningliquidunit
removalbuttonandremovethe
cleaningliquidunit.
3
3
Washawaytheoldcleaningliquidandbeard
trimmingsandthenrinsethecleaningliquidunit.
• After washing, be sure to attach the cleaning
liquid filter.
4
4
Pourtapwateranddetergent
intothecleaningliquidunit.
• Do not let the water rise above
the maximum water line. This
may cause the cleaning liquid
to spill.
ES-RT84_CH.indb 31
5
5
Attachthecleaningliquidunit.
• Immediately wipe up any cleaning
liquid that has been spilt.
Be careful not to drop cleaning
liquid onto leather products or
wooden floors as it may cause
discoloration.
6
6
Pressthetopoftheself-cleaningrecharger
downandsecurelyattachuntilitclicks.
►Notes

• The water and detergent will mix after cleaning
begins, making cleaning liquid.
• If "AUTO" mode cannot be selected or the CHECK
lamp glows for 5 seconds when the SELECT button is
pressed, the cleaning liquid needs to be replaced.
Replace the cleaning liquid.
• When replaced, the cleaning liquid will last for
approximately 30 days if used once per day. (This will
differ depending on beard thickness and the ambient
temperature.)
• Use the detergent within approximately 6 months after
opening the package. When 6 months have passed,
discard the cleaning liquid, and then pour new water
and detergent into the cleaning liquid unit.
• Replace the water and detergent at the same time.
Otherwise the cleaning function may deteriorate.
• Only use self‑cleaning recharger detergent for
Panasonic shavers.
31
2013/07/17 14:27:44