Clean - Panasonic ES‑LV53 Operating Instructions Manual

Clean

1. Disconnect the cord from the shaver.
2. Apply some hand soap and some
water to the system outer foil.
3. Rotate the lock ring to unlock the
power switch.
4. Press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode.
The battery capacity lamps blink in
order.
After about 20 seconds, it will be
automatically turned off, or you can
turn it off by pressing the power
switch.
5. Remove the outer foil section and
press the power switch for more
than 2 seconds to activate the sonic
vibration cleaning mode and clean it
with running water.
Rinse with water and shake up
and down several times to remove
the water.
6. Wipe off any drops of water with a
dry cloth.
7. Dry the outer foil section and the shaver completely.
8. Attach the outer foil section to the shaver.
9. Lubricate the shaver.
► Notes
Be careful not to hit the main body on the sink or any other
object while draining the water. Failure to do so may cause
malfunction.
未命名-2.indd 27
4
Warning
Disconnect the cord from the shaver before cleaning it in
water to prevent electric shock.
Lubrication
5
To maintain shaving comfort for a long time, it is recommended
that the oil provided with the shaver is used.
1. Switch off the shaver.
2. Apply one drop of oil to each of
the outer foils.
3. Raise the trimmer and apply a
drop of oil.
4. Switch the shaver on, and run it
7
for approximately five seconds.
5. Switch off the shaver, and wipe off any excess oil from the
outer foils with a soft cloth.
Cleaning with the brush
► Cleaning with the long brush
Clean the system outer foil
( ), the shaver body (
a
the trimmer (
long brush.
The mark on the left means suitable for cleaning
under an open water tap.
a
) and
b
) using the
c
2 3
c
b
27
2017/7/11 14:32:47