UsingTheProtectiveCap; Charge - Panasonic ES-RT84 Manual

Using the protective cap
When carrying the shaver, the protective cap may be used
to protect the outer foil and prevent switch misoperation.
Clean the beard debris before installing the protective cap.
Attaching the protective cap
Attach the protective cap as illustrated.
• Securely attach the protective cap to the
main unit.
Removing the protective cap
Remove the protective cap by pressing
the both sides.
ES-RT84_CH.indb 27

Charge

The charging time is approx. 1 hour.
A full charge will supply enough power for approx. 21
shaves of 3 minutes each. (This will differ depending
on usage.)
Charging using the self-cleaning recharger
Thoroughly wipe off any drops of water on or around
the self-cleaning recharger so that it is dry before
charging the shaver.
1
1
Insert the appliance plug into the self-
cleaning recharger.
2
2
2
1 1
Pull up the charging terminal until
it clicks.
3
3
Remove the protective cap and
then attach the shaver.
• Turn the shaver off before attaching.
• Check that the outer foil is not
deformed or damaged when you
are attaching the shaver.
4
4
Push down the charging terminal
until it clicks.
27
2013/07/17 14:27:41