Panasonic ES-RT84 Manual page 35

Cleaningtheself-cleaningrecharger
Beard trimmings may become attached to the cleaning
tray of the self‑cleaning recharger. Follow the steps
below to remove them. We recommend doing this each
time you change the cleaning liquid.
1. Be sure to remove the cleaning
liquid unit and the appliance plug
from the self‑cleaning recharger.
• Be careful not to spill the cleaning
liquid.
• Some cleaning liquid components
and skin oil may separate and
adhere to the cleaning liquid unit
and cleaning liquid filter. This does
not indicate a problem.
2. Pour water as illustrated while
tilting the cleaning liquid unit and
shaking it gently.
• You can clean with the cleaning
liquid filter removed.
• After washing, be sure to attach
the cleaning liquid filter.
3. Gently wipe off any beard trimmings
attached to the inside of the cleaning tray
with a cloth or tissue paper dampened
with water.
• Clean the corners and uneven parts of
the cleaning tray with a cotton swab
dampened with water.
ES-RT84_CH.indb 35
►Whenthewaterdoesnotdrainfromthe

cleaningtray
Beard trimmings may clog the drain at the
bottom of the cleaning tray.
In this case, you cannot clean or dry the
shaver.
Push the beard trimmings down through the
drain with a toothpick etc.
35
2013/07/17 14:27:47