英 文 解 説 Guidance In English 19 - Philips 9000 Series Guidance

Problem
I replaced
the shaving
heads, but the
replacement
reminder is still
showing.
A shaving
head symbol
has suddenly
appeared on the
display.
Water is leaking
from the bottom
of the appliance.
Possible cause
You have not reset
the replacement
reminder.
This symbol is
the replacement
reminder.
During cleaning,
water may collect
between the inner
body and the
outer shell of the
appliance.
Solution
To clean the shaving
heads thoroughly, remove
the shaving heads
from the shaving head
holder one by one (see
'Replacement'). Then
separate the cutter from
its guard and rinse each
matching set under the
tap. After rinsing, place
the cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
To reset the replacement
reminder, press and hold
the on/off button for
approx. 7 seconds.
Replace the shaving heads.
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
38
English