Table of Contents
Advertisement
English
Problem
Water is leaking
from the bottom
of the appliance.
Possible cause
During cleaning,
water may collect
between the inner
body and the outer
shell of the
appliance.
Solution
To clean the shaving heads
thoroughly, remove the
shaving heads from the
shaving head holder one
by one (see
'Replacement'). Then
separate the cutter from its
guard and rinse each
matching set under the tap.
After rinsing, place the
cutter back into its
corresponding guard.
Finally, put the shaving
heads back into the
shaving head holder (see
'Replacement').
This is normal and not
dangerous because all
electronics are enclosed in
a sealed power unit inside
the appliance.
37
Advertisement
Table of Contents
