Table of Contents
Advertisement
Problem
The shaver does
not shave as well
as it used to.
The shaver does
not work when I
press the on/off
button.
The shaver does
not work, although
it is connected to
the mains.
Possible cause
The shaving
heads are
damaged or
worn.
Foam or gel
residues clog
up the shaving
heads.
Long hairs
obstruct the
shaving heads.
You have not
inserted the
shaving heads
properly.
The rechargeable
battery is empty.
The temperature
of the shaver is
too high. In this
case, the shaver
does not work.
If the shaver
does not work
when you press
the on/off button,
the battery is
empty.
34
Solution
Replace the shaving heads
(see chapter 'Replacement').
Rinse the shaving unit under a
hot tap (see chapter 'Cleaning
and maintenance').
Clean the shaving heads one
by one (see chapter 'Cleaning
and maintenance').
Make sure that the projections
of the shaving heads fit exactly
into the recesses (see chapter
'Cleaning and maintenance. ' ).
Recharge the battery (see
chapter 'Charging').
As soon as the temperature
of the shaver has dropped
sufficiently, you can switch on
the shaver again.
This shaver is not designed
to be used directly from the
mains, so you should recharge
the battery (see chapter
'Charging').
English
Advertisement
Table of Contents
