Product Specifications; Loading Batteries - Primos 65064M User Manual

Product Specifications ：
Model Number
Image Resolution - Photo Mode
Image interval
Lens Angular Field of View
Video
Trigger speed
PIR Sensor
PIR distance
IR Flash
Video interval
Video Clip Time
Screen display
SD Card
Battery life
Working temp
Storage temp
Waterproof rate
Loading Batteries ：
Press the Battery Tray EJECT button to release the battery tray and pull it out for loading. Switch the
camera's power OFF when loading / unloading batteries. Be sure to insert each battery so it's polarity (+/-
direction) matches the polarity indications at the bottom of the battery tray. A full set of 6 AA Alkaline
batteries should be used.
Note:
² NiMH Rechargeable batteries can also be used but are NOT recommended, because they might
have a shorter life span due to their reduced efficiency over time and at low temperature.
² 6 NEW batteries are recommended because mixed old and new batteries may result in shorter
working time.
² The camera display will show "LOBT" when the battery is low.
65064
12MP (2MP base sensor)
Fixed 5 seconds
38 degrees (+/- 2 degrees)
720p (1080x720)
1 second
Yes, auto sensitivity
80 feet
24pcs 940nm LEDs, 80 feet flash range
Fixed 5 seconds
10 seconds ea.
Backlit display (TN) 34*16mm ;
Up to 32GB SD card
Up to 6 months with 6 AA batteries
-10℃–60℃
-20℃-80℃
IP 54