Table of Contents
Advertisement
Advertisement
Table of Contents
Related Manuals for Primos Bullet Proof 2
Summary of Contents for Primos Bullet Proof 2
- Page 1 Instruction Manual Model #: 63063 1-16...
- Page 2 - DO NOT OPEN CASE HOUSING. UNINSULATED, ‘DANGEROUS VOLTAGE’ WITHIN PRODUCTS ENCLOSURE. DO NOT REMOVE HOUSING COVER. THERE ARE NO USER - SERVICEABLE PARTS INSIDE, REFER SERVICING TO PRIMOS® CUSTOMER SERVICE. • Only use batteries as specified in this user manual and install according to correct polarization.
- Page 3 CARE & CAUTION • Transport and handle with care. Do not strongly shake, bump, hit, drop or otherwise cause impact to the product – can result in product malfunction or damage to key components. Additionally, damage to the case could result in imperfections to water-resistant properties. •...
-
Page 4: Table Of Contents
Page Index Introduction Parts & Controls Guide Battery and SD Card Installation Date & Time Imprint Feature 11-13 Power On Set Up 14-15 Viewing the hotos Glossary Technical Specifications Troubleshooting/FAQ 18-20... - Page 5 Congratulations on your purchase of one of the best Game Cameras on the market! Primos is very proud of this camera and we are sure you will be pleased with yours as well. We appreciate your business and want to earn your trust.
-
Page 6: Introduction
Congratulations on your purchase of a Primos BULLET PROOF 2 Game Camera. This camera, with its weatherproof, rugged construction, is designed to record animal activity in the outdoors. Your BULLET PROOF 2 Game Camera features a compact, portable size and an extra long battery life. -
Page 7: Parts & Controls Guide
Parts and Controls Guide PIR/Battery Indicator LED Light Infrared LED Array Camera Lens Latch Light Sensor PIR Motion Sensor Front of Camera PIR/Battery Indicator LED: • Lights when PIR sensor is triggered during first 10 sec after power on. • Lights when capturing photo or video during first 3 minutes after power on. -
Page 8: Parts & Controls Guide
Parts and Controls Guide Operating Status Indicator LED Light Interior View (Unlatched) Battery Compartment (note orientation for correct polarity) Side View Power/Mode Switch SD Card Slot Operating Status Indicator LED: • Lights when Timetool software has finished saving to SD card (see pg. 11). •... -
Page 9: Battery And Sd Card Installation
SD CARD INSTALLATION Memory Your BULLET PROOF 2 Game Camera has a memory card slot, to accept SD cards up to 32 GB max. capacity (not included). When the SD card is full, the camera will stop capturing images and the Operating Status Indicator LED will blink. -
Page 10: Date & Time Imprint Feature
SD card, as described below. If no text file with date/time is found on the card when the camera is turned on, only “Primos” will be imprinted on the photos. -
Page 11: Date & Time Imprint Feature
OK to save the text file. Remove the SD card (eject it first if necessary) and insert it into your BULLET PROOF 2 Game Camera (label side up as previously described). The date and time data will be automatically loaded into the camera, and the text file (txt) will be deleted. -
Page 12: Power On
Eject the SD card (right click, select “Eject (name of card)_”, and wait for the card icon to disappear from your Mac desktop). Make sure the Primos cam’s power switch is off. Insert the SD card into the camera’s card slot, then switch on the camera. Test the date imprint by waving a hand in front of the camera a few times during a minute or two. -
Page 13: Set Up
DO NOT switch off the camera while this is on, or the video file may become damaged and unplayable. To capture photos/videos of activity in the area you choose to locate your Primos BULLET PROOF 2 Game Camera, follow the steps listed next in “SET UP”: SET UP 1. -
Page 14: Viewing The Hotos P
3. Test the Coverage Area One of the BULLET PROOF 2 Game Camera’s most useful features is the ability to test the coverage area. • After mounting the camera, open the front housing and slide the Power switch to the “PIC” position. -
Page 15: Glossary
Requires infrared energy (heat) in addition to motion to trigger the sensor to help limit detection to live subjects (rather than leaves, etc). Moon Phase: The BULLET PROOF 2 Game Camera has a feature which imprints a moon phase stamp on each photo for reference. The moon phase is based on the date/time settings. -
Page 16: Technical Specifications
TECHNICAL SPECIFICATIONS Model Number 63063 Image Sensor Type 1/2.7 Inch CMOS Sensor Resolution 2 million pixels Effective Focal Length 7.6 mm Lens Aperture f/2.5 IR Filter Automatic IR Filter PIR Sensor Trigger Speed <1.0 second Number of IR LED 14 LEDs Max Night Vision Lighting Distance 45 feet Storage... -
Page 17: Troubleshooting/Faq
SD card so that it will not work properly with the BULLET PROOF 2 Game Camera. If you have used an SD card in another device before inserting it in your BULLET PROOF 2 Game Camera, you might want to try formatting the card on your computer (make sure you have backed up any important files first, as formatting will erase all previous files). - Page 18 If this is seen on a consistent basis, then the sensor may need servicing. Please contact Primos customer service. 6. Video file won’t play a. If the camera was powered off during a video recording (green...
-
Page 19: Setup
Troubleshooting / FAQ Photos Do Not Capture Subject of Interest Try to set your camera up in an area where there is not a heat source in the camera’s line of sight. In some cases, setting the camera near water will make the camera take images with no subject in them.
Need help?
Do you have a question about the Bullet Proof 2 and is the answer not in the manual?
Questions and answers