Utility Mode; Utility Mode; Utility System; Utility System - Yamaha VL Owner's Manual

Virtual acoustic synthesizer and virtual acoustic tone generator
Hide thumbs Also See for VL:
Table of Contents

Advertisement

UTILITY Mode

Utility System

UTIL/SYSTEM/KBD SETTING

Octave SW Hold
¯
New settings for the "Octave SW Hold" parameter allow the octave hold
switches to be used as trill switches to produce semitone and whole-tone trills. When
"Half PB" is selected pressing the UP or DOWN octave hold switch shifts the pitch up
or down by a semitone. With the "Full PB" setting the octave hold switches shift the
pitch a whole tone. In both cases pitch returns to normal when the switch is released.
NOTES
wheel!

UTIL/SYSTEM/TG SETTING

WX Lip
¯
The keyboard-based VL models — the VL1 Ver.2 and VL7 Ver.2 — now include
the "WX Lip" parameter originally found only in the VL1-m.
This parameter can be set to "Expand" when using a WX11 or WX7 Wind Con-
troller in the tight-lip mode to expand the normally limited lip pitch bend range of these
controllers to the full range available on the VL instrument. Set to "Normal" when using
a WX11 or WX7 in the loose-lip mode, or when using an external keyboard or other non-
wind controller.
SYSTEM

UTILITY MODE

MIDI BULK DUMP
DISK
EDIT RECALL
DEMO
Do not use the octave hold switches while operating the PITCH
53

Advertisement

Table of Contents
loading

This manual is also suitable for:

Vl version2Vl 2

Table of Contents