24
PLAY Mode
PLAY Mode Display
In Version 2 several status indicators have been added to the PLAY mode display.
•
The current setting of the UTILITY/SYSTEM/BREATH MODE "Mode"
parameter is shown on the top line of the PLAY mode display: "BC/WX",
"Velocity", or "Touch EG" (˘ page 53).
•
The current MIDI transmit and receive channels appear on lines 1 and 2 of the
PLAY mode display, respectively.
•
When the EDIT/Key Mode parameter is set to "Part" (˘ page 25), and
the EDIT/COM/MISC/PART SETTING "Split" parameter is "off"
(˘ page 28), the element 1 and 2 MIDI receive channels appear on line 4 of
the PLAY mode display.
•
When the EDIT/Key Mode parameter is set to "Part" (˘ page 25), and
the EDIT/COM/MISC/PART SETTING "Split" parameter is set to
"Static" or "Dynamic" (˘ page 28), the element 1 and 2 split point
appears on line 4 of the PLAY mode display.
Continuous Sliders
In the original VL models MIDI output corresponding to the – and ı con-
tinuous slider settings was transmitted as system exclusive data. In Version 2 the continu-
ous sliders produce MIDI output in the form of control change data: control change
number 16 for –, and control change number 17 for ı.