Table of Contents
Advertisement
Phaser
32
VL Version 2
Use the ¡ (">") and ™ ("<") buttons to switch between the two pages
•
of effect parameters.
Element on/off — E1: & E2:
¯
In this parameter the cursor can be positioned at "E1:" or "E2:" to individually
turn the phaser effect on or off for elements 1 and 2, respectively. When "on" the output
of the corresponding element is fed to the input of the modulation stage, and when "off"
the modulation stage is bypassed. The "E2:" parameter will not appear when editing a
single-element voice.
Mode
¯
When set to "Stereo" the phaser effect is applied independently to the left and right-
channel signals. When "Monaural", the phaser effect is applied to a mix of the left and
right-channel signals.
Monaural Mode Block Diagram
L In
R In
Stereo Mode Block Diagram
L In
R In
Wet/
dry
Phaser
Wet/
dry
Wet/
dry
Phaser
Phaser
Wet/
dry
L Out
R Out
L Out
R Out
Advertisement
Table of Contents
