Table of Contents
Advertisement
Hand-operated installing way
Note: The hand-operated installing ways of serial interface and parallel interface are the same.
1) The installing steps of parallel interface for Windows 2000/XP/Vista are as follows:
1 Click "Start" → "Settings" → "Select Printers".
2. Click "Add Printer", then it pops up a window of "Add Printer Wizard", click "Next", then please read
the select guide carefully, such as, select "Local printer" in the "Local or Network Printer" window,
then click "next".
3. A window of "Select a Printer Port" pops up, select a usable port. Such as, select "LPT1:
(Recommended Printer Port)", click "Next".
4. A window of "Install Printer Software" pops up, click "Have Disk...", click "Next".
5. A window of "Install From Disk" pops up. Please according to the operating system environment, you
should select the path as follow: CD-ROM → "Driver" → "WIN2000 (XP-Vista-Win7)", click "Open",
then click "OK" to return to the window of "Install Printer Software", select the respective model, click
"Next".
6. Follow the guide click "Next" gradually till the installation is finished.
2) The installing steps of parallel interface for Windows 7 are as follows:
1. Click "Start" → "Device and Printers".
2. Click "Add Printer", then it pops up a window of "Add Printer Wizard", click "Next", then please read
the select guide carefully, such as, select "Local printer" in the "Local or Network Printer" window,
then click "next".
3. A window of "Select a Printer Port" pops up, select a usable port. Such as, select "LPT1:
(Recommended Printer Port)", click "Next".
4. A window of "Install Printer Software" pops up, click "Have Disk...", click "Next".
5. A window of "Install From Disk" pops up. Please according to the operating system environment,
such as Windows XP operating system, you should select the path as follow: CD-ROM → "Driver"
→"WIN2000 (XP-Vista-Win7)", click "Open", then click "OK" to return to the window of "Install
Printer Software", select the respective model, click "Next".
6. Follow the guide click "Next" gradually till the installation is finished.
3) The USB interface installing steps for Windows 2000/XP/Vista/Win7 are as follows:
The following steps are used Windows XP as example. There are slight differences among different
operating systems.
1. Connect the printer to computer with an USB cable and turn on the printer.
2. After the computer find out new hardware and finish searching, pop up a window of "Found New
Hardware Wizard", choose "Install from a list or specific location (Advanced)", click "Next".
3. A window of "Found New Hardware Wizard" — "Please choose your search and installation
options" pops up, choose "Don't search, I will choose the driver to install", click "Next".
4. A window of "Add Printer Wizard" pops up, click "Have Disk...", click "Browse".
5. A window of "Install From Disk" pops up. Please according to the operating system environment,
you should select the path as follow: CD-ROM → "Driver" → "WIN2000 (XP-Vista-Win7)", click
"Open", then click "OK" to return to the window of "Add Printer Wizard", select the respective model,
click "Next".
6. Follow the guide click "Next" gradually till the installation is finished.
4) The installing steps for Windows 98 are as follows:
(1) The installing steps with a parallel cable or a serial cable:
Documax 5380 User's Manual
- 10 -
Advertisement
Table of Contents
