Panasonic Nanoe EH‑SA43 Manual page 29

3
3
Check and adjust
the angle (vertical
direction) and
position of the
nozzle.
• Hold and adjust the nozzle while avoiding direct
contact with the steam.
• Confirm that bedding is not blocking the steam
outlet and nanoe™ outlet.
• Adjust the direction of the nozzle and the main
unit so the breeze from the steam outlet does not
come into direct contact with your face.
• The temperature of the steam is lowered so that
you will not get burned even if the steam comes
into direct contact with your skin.
nanoe™ is emitted from the nanoe™ outlet
after steam completes.
The "纳米水离子" (nanoe™)
lamp glows blue.
• You will hear the sound of
breeze generated from the
fan and a breeze emitted
from the steam outlet during
nanoe™ operation. These
are not malfunctions.
EH-SA43_CH.indb 29
• You will hear beeping and swooshing discharging
Adjustment
range
• nanoe™ is not visible to the naked eye.
It will stop automatically after approximately
8 hours.
The "纳米水离子" (nanoe™) lamp blinks blue.
• Pressing the "电源" (power) switch during
4
4
Press the "电源" (power)
switch to turn off the
appliance.
All lamps turn off.
nanoe™ outlet
sounds during nanoe™ operation.
The discharging sound is not constant, and the
sound quality as well as the length of the sound
(transient or intermittent) may vary, but do not
indicate malfunction.
operation will stop the operation.
(All the lamps will turn off.)
Steam will start from the beginning when the "电
源" (power) switch is pressed again.
29
2013/04/04 16:03:40