PartsIdentification - Panasonic Nanoe EH‑SA43 Manual

Parts identification

  





EH-SA43_CH.indb 25

Close








A Main unit
1 "蒸汽" (steam) lamp

2 "电源" (power)
Open
switch [0/1]
3 "纳米水离子"
(nanoe™) lamp
4 nanoe™ outlet
5 Nozzle
6 Steam outlet
B Water supply tank
7 Water supply cap
8 "满水位"(FULL)
mark
9 Tank
• When the appliance
is used for the first
time, some water
may remain around
the water supply
tank. This is residual
water used for

inspection in the
factory, and does not
cause any sanitation
problems.
C Back side
 "检测" (Check) lamp
 Handle
 Water outlet
 Cord
 Plug
D Base
 Filter
 Inclination switch
• For your safety, the
inclination switch will
activated to prevent
the main unit from
operating unless the
appliance is placed
on a desk or other
hard, flat surface.
The appliance may
not operate when
placed on certain
mats or carpets.
25
2013/04/04 16:03:39