HowToUse - Panasonic Nanoe EH‑SA43 Manual

Hide thumbs

Advertisement

Table of Contents
How to use
Operation of the Facial Steamer for night
Steam is generated for approximately 20 minutes
followed by nanoe™ generated for approximately 8 hours.
(Approx. 8 hours 20 minutes)
Hydrated breeze steam
(Approx.
20 minutes
)
*1
*1 The length of time of the hydrated breeze steam will
differ depending on the amount of water supplied to
the tank.
*2 The steam is mixed with the breeze, and the
temperature is set for safety purposes that also
make the steam invisible.
During steam
During nanoe™ Finished
The "蒸汽"
The "纳米水离
(steam) lamp
子" (nanoe™)
glows red.
lamp glows blue.
• To prevent glaring, the "纳米水离子" (nanoe™) lamp
will gradually dim over approximately 1 minute after
use, but will not go out completely. In a brightly lit room,
it may be difficult to see this change in brightness.
28
EH-SA43_CH.indb
28
,
*1
*2
"nanoe™"
(Approx. 8 hours)
The "纳米水离
子" (nanoe™)
lamp blinks blue
1
1
Plug in the plug into the
household outlet.
2
2
Press the "电源" (power)
switch to turn on the
appliance.
The "蒸汽" (steam) lamp glows
red.
• Firmly press the "电源"
(power) switch in completely.
Steam will be emitted from the steam outlet
after approximately 1 minute 30 seconds elapse.
• A "clicking" sound can be heard right after the
power is turned on and steam completes. This is
not a malfunction.
• Steam is not visible to the naked eye.
The temperature is also set slightly lower during
your sleep as a safety precaution.
• Do not tilt, shake, or transport the device during
steam operation or within 10 minutes after steam
operation completes. Doing so may cause
scalding.
2013/04/04
16:03:39

Advertisement

Chapters

Table of Contents
loading

  Related Manuals for Panasonic Nanoe EH‑SA43

Table of Contents