Page Copy - Yamaha PortaTone PSR-510 Owner's Manual

The PSR-510 will automatically receive bulk dump data from another PSR-510 or MIDI data storage de-
vice as long as the MIDI OUT terminal of the external device is properly connected to the MIDI IN connector
of the PSR-510, and PSR-510 MIDI reception is enabled.
When this occurs the [MIDI BULK DUMP/PAGE COPY] indicator will light and all panel controls will
be disabled during reception. The progress of the bulk dump reception ([-A-]m[-S-]m[-n-]m[-r-]) will be
indicated on the MULTI DISPLAY in the same as for bulk dump transmission. When all the data has been
received, the [MIDI BULK DUMP/PAGE COPY] indicator will go out and all panel settings will corre-
spond with the received bulk dump data (the received data is saved to the currently selected PAGE
MEMORY).
The [MIDI BULK DUMP/PAGE COPY] button can also be used to copy the entire contents of one PAGE
MEMORY number to any other, rather than transmitting the data via the MIDI OUT terminal.
Z
X
C
V
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Select the PAGE MEMORY number you want to copy to a different
number (page 54).
Press the [MIDI BULK DUMP/PAGE COPY] button. The "ARE YOU
SURE?" indicator will flash and the PSR-510 will ask "Are you sure?". At
the same time "1dP", "2dP", "3dP", or "4dP" will appear on the MULTI
DISPLAY, depending on the selected PAGE MEMORY number.
Use the [+] and [–] buttons or the data dial to select the PAGE
MEMORY number to which you want to copy the data. The source PAGE
MEMORY number appears on the left digit of the MULTI DISPLAY while
the destination PAGE MEMORY number appears on the right digit.
When "cL" appears to the right of the page number on the MULTI DIS-
PLAY the page reset function is selected. If you press [YES] to execute the
operation as described in the next step, all settings in the selected page will
be reset to their initial values.
Press the [YES] button to execute the page copy operation, or the [NO]
button to cancel and return to the VOICE SELECT mode.
When the data has been copied (this only takes about a second) the PSR-
510 will automatically return to the VOICE SELECT mode.
57