Clock Mode; Start/Stop Mode - Yamaha PortaTone PSR-510 Owner's Manual

Reception of an external MIDI clock signal can be enabled or disabled as required. When disabled, all of the
PSR-510's time-based functions (Auto Accompaniment, SONG MEMORY, etc.) are controlled by its own inter-
nal clock, the speed of which is set by the PSR-510 [TEMPO] button. When MIDI clock reception is enabled,
however, all timing is controlled by an external MIDI clock signal received via the PSR-510 MIDI IN terminal
(the PSR-510 [TEMPO] setting has no effect).
Z
X
This function determines the effect of external MIDI start and stop signals. There are three start/stop modes,
as follows:
Start/stop reception disabled.
MIDI start and stop commands start and stop the PSR-510 Auto Accompaniment feature.
MIDI start and stop commands start and stop the PSR-510 SONG MEMORY feature.
Z
X
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select "cL" on the MULTI DISPLAY ("cL" is the
next step above MIDI channel 16).
................
Use the [+/–] button in the number-button row to select the desired clock
mode. The disable and enable modes are selected alternately each time the
[+/–] button is pressed, and the selected mode appears on the left digit of
the MULTI DISPLAY ("d" for disable; "E" for enable).
Press the [RECEIVE CH/CL/COM] button, then use the [+] and [–]
buttons, the number buttons, the data dial, or the [RECEIVE CH/CL/
COM] button itself to select "cd" on the MULTI DISPLAY ("cd" is the
next step above "cL" — or the next step below MIDI channel 1).
................
Use the [+/–] button in the number-button row to select the desired start
mode. The start/stop modes are selected in sequence each time the [+/–]
button is pressed, and the selected mode number appears on the left digit of
the MULTI DISPLAY.
59