Using A Custom Accompaniment - Yamaha PortaTone PSR-510 Owner's Manual

B
N
M
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Recording will begin as soon as you press the ACCOMPANIMENT CON-
TROL section [START/STOP] button or play a chord or note on the keyboard.
The preset accompaniment style data in the track being recorded will be en-
tirely erased (except the data you have entered). The accompaniment will play
repeatedly, and you can add new material to the selected track by playing on
the keyboard.
During recording, you can clear a track if you want to record new material
from scratch: press the TRACK button corresponding to the track you want to
clear while holding the [CLEAR] button. Individual notes, including
Keyboard Percussion instruments, can be cleared by pressing the
corresponding key while holding the [CLEAR] button.
Repeat steps 3, 4, and 5, selecting and recording the various tracks as
required until your custom accompaniment is complete. You can also switch
sections while recording, so you can record an entire custom accompani-
ment without having to stop recording.
Stop recording by pressing the TRACK button being recorded or the
ACCOMPANIMENT CONTROL section [START/STOP] button. The
[REC] indicator will go out, and the recorded accompaniment data will
automatically be stored in the CUSTOM ACCOMPANIMENT (style
number "00") of the currently selected PAGE MEMORY.
Pressing the [SYNC-START/STOP] button while recording stops re-
cording and returns to step 3 above (record ready mode).
To use a custom accompaniment, simply select the PAGE MEMORY in
which it is stored, select style number "00", and use the Auto Accompani-
ment feature in the normal way (page 23).
47