Clearing Tracks; Changing The Recorded Settings - Yamaha PortaTone PSR-510 Owner's Manual

Record Functions
The [CLEAR] button can be used to completely erase the following data:
Z
X
C
The [REWRITE SETTING] button can be used to change the settings of all recordable parameters for any
specified track or pad. You could, for example, use this function to change the voice or effect used in a SONG
MEMORY track.
All recorded data in the following tracks and pads except note on/off,
octave, sustain, pitch bend, and chord changes:
Z
52
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Use the [MEASURE #] button to set the first measure to be cleared
(page 42). All subsequent measures up to the end of the song will be
cleared.
Press the appropriate track or pad button while holding the [CLEAR]
button. The ARE YOU SURE? indicator will light and the PSR-510 will ask
"Are you sure?"
Press the [YES] button if you want to go ahead with the clear operation,
thus erasing the selected track or pad. Press [NO] to cancel the operation
and preserve the contents of the track or pad. "---" will appear on the
MULTI DISPLAY while the data is being cleared.
Only if you will be rewriting Song Memory settings, use the [MEAS-
URE #] button in conjunction with the [+] and [–] buttons, the number but-
tons, or the data dial to specify the measure at which you want the settings
to be rewritten. The specified measure number will appear on the MULTI
DISPLAY.