Dsp Depth; Pan - Yamaha PortaTone PSR-510 Owner's Manual

Selecting & Playing the Voices
The PSR-510 features a built-in digital signal processor (DSP) that can be used to apply a range of reverb and
delay effects to the PSR-510 voices. The [DSP TYPE] button in the OVERALL CONTROL section (page 21)
determines the type of effect to be applied, while the VOICE section [DSP DEPTH] button lets you individually
set the amount of effect applied to each orchestration part.
Z
X
C
The PSR-510 delivers true stereo sound, and you can use this parameter to individually set the stereo (pan)
position of each orchestration part to create a broad stereo image of your sound.
Z
X
C
14
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | |
Use the ORCHESTRATION [EDIT] button to select the part you want
to edit.
Press the VOICE control section [DSP DEPTH] button. The current
DSP depth value of the selected part will appear on the MULTI DISPLAY.
Use the [ ] and [ ] buttons, the number buttons, the data dial, or the
[DSP DEPTH] button itself to set the desired DSP depth. The depth range
is from 00 (no effect, direct sound only) to 15 (maximum effect).
The default DSP depth value (06) can be recalled instantly by pressing
both the [ ] and [ ] buttons at the same time.
Use the ORCHESTRATION [EDIT] button to select the part you want
to edit.
Press the VOICE control section [PAN] button. The current pan value of
the selected part will appear on the MULTI DISPLAY.
Use the [ ] and [ ] buttons, the number buttons, the data dial, or the
[PAN] button itself to set the desired pan value. The pan range is from 7
(full left) to 7 (full right). A setting of "0" places the sound of the selected
part in the center of the stereo sound field. Other settings produce in-be-
tween positions. " 4", for example, would place the sound between center
and full left.
The center pan position (0) can be recalled instantly by pressing both the
[ ] and [ ] buttons at the same time.