Voice & Volume Rewrite; Clearing The Song Tracks - Yamaha PortaTone PSR-320 Owner's Manual

Voice & Volume Rewrite
You can rewrite the last recorded voice change in the MELODY tracks
during playback by using the cursor buttons to select the voice number of
the target track (the voice number will flash), and then using the number
buttons or [–/NO] and [+/YES] buttons to select the desired voice number.
The data will actually be rewritten when the [PLAY/STOP] button is
pressed, the end of the song is reached, or the next voice change is encoun-
tered in the recorded data. The original voice number can be recalled before
it is actually rewritten by simultaneously pressing the [–/NO] and [+/YES]
buttons. Any other voice changes included in the recorded track data will
take effect at the appropriate times.
The volume of each track can be rewritten during playback in the same
way. Use the cursor buttons to select the volume bar of the target track (the
volume bar will flash), and then use the [–/NO] and [+/YES] buttons to set
the maximum volume of the track as required. The shorter the bar, the lower
the volume. The data will actually be rewritten when the [PLAY/STOP]
button is pressed or the end of the song is reached. The original volume can
be recalled before it is actually rewritten by simultaneously pressing the
[–/NO] and [+/YES] buttons. The new volume data is written only at the
beginning of the track and affects the entire track.
CURSOR

Clearing the SONG TRACKS

All data in the ACCOMP, MELODY 1 and MELODY 2 tracks of the
currently selected song can be completely erased by first pressing the [MI-
NUS ONE] button while holding the [REC] button, and then press the
[+/YES] button in response to the "Clear?" confirmation prompt on the dis-
play (press [–/NO] if you decide not to erase the data).
SONG
REC
PLAY/STOP REPEAT
PLAY
/
ACCOMP MELODY MELODY
1 2
101 103
MINUS
ONE
U17
• The dual voice will change
• Voice and volume data can
* *
1 – –
1 2 3
4 5 6
7 8 9
–/NO +
0 / YES
• Only songs you have recorded
• If a non-user song number is
Song Recording
automatically when a melody
track voice is changed.
only be rewritten in songs you
have recorded yourself.
yourself can be cleared.
selected when the song-clear
mode is engaged, user song
number 17 will automatically
be selected.
41