International Harvester Company 15D-2 Operator's Manual page 36

SCHEDULED 'MAINTENANCE
, TRACTOR EQUIPMENT LUBRICATION POINTS
Service After Every
10
Hours of Operation ~Continued
lIIult •
.co
Upper Itrut I
(Models 150.1 and 150.3 only).
Item 8 ·IUpper Struts
(Models 150-1 ond 150-3 only) (Illust. 40)
Apply two or three strokes of the lubrica-
tot
to each fitting or sufficient lubricant to
force out the old lubricant and dirt.
..
-
.
lIIulf.41
Valve control link
(M~dels 150.2jand 15G.2 only).
Item 9 • Valve Control Link
(Model~-lS0.21and 15G:2 only) ( IIIUlt. 41 )
Apply two or three strokes of the IubzIc a-
tor to each fitting or sufficient lubricant to
force out the old lubricant and dirt.
lIIult.42
Control, link
(Models 150·1, and 15G·1only).
Item 10 • Control Link
(Models 150·1 and 15G.1 only) (lIIust. 42)
Apply two or three strokes of the lubrica-
tor to each fitting or sufficient lubricant to
force out the old lubricant and dirt.
lIIult. 43
Rod end bearing and control Ihaft houling
(Models 150.1, 150·2, 15G.1 and 15G·2only).
Item 11 • Rod End Bearing pnd Control Shaft Housing
(Models 150-1, 150-2. 15(;.1 and 15G.2 only)
("'nt.
43)
Apply two or three strokes of the lubrica-
tor to each fitting or sufficient lubricant to
force out the old lubricant and dirt.
.A - Rod end bearing.
34
B - Control shaft housing.