Do you have a question about the McCORMICK FARMALL Cub and is the answer not in the manual?
Questions and answers
Ericblaine
February 20, 2025
How can you get your tractor to run the right way and from leaking the reaer mine seal ps eric blaine
1 comments:
Mr. Anderson
May 14, 2025
To fix a rear main seal leak on an International Harvester Cub tractor:
1. Remove the engine from the tractor. 2. Locate the rear main seal behind the flywheel. 3. Inspect the seal housing. If the seal is loose, center punch around the housing to help hold the new seal in place. 4. Apply sealer around the outside edge of the new seal. 5. Install the new rear main seal carefully. 6. Reassemble the engine and reinstall it in the tractor.
Check the oil pump near the flywheel as it could also be a leak source.
This answer is automatically generated
Related Manuals for International Harvester Company McCORMICK FARMALL Cub
Need help?
Do you have a question about the McCORMICK FARMALL Cub and is the answer not in the manual?
Questions and answers
How can you get your tractor to run the right way and from leaking the reaer mine seal ps eric blaine
To fix a rear main seal leak on an International Harvester Cub tractor:
1. Remove the engine from the tractor.
2. Locate the rear main seal behind the flywheel.
3. Inspect the seal housing. If the seal is loose, center punch around the housing to help hold the new seal in place.
4. Apply sealer around the outside edge of the new seal.
5. Install the new rear main seal carefully.
6. Reassemble the engine and reinstall it in the tractor.
Check the oil pump near the flywheel as it could also be a leak source.
This answer is automatically generated