Setting The Split Point - Yamaha MM8 Owner's Manual

Pattern Functions
5
Press a main section button: [A]–[D].
The indicator to the upper left of the active
main section button will light.
6
The main section of the selected pat-
tern will start as soon as you play a
chord with your left hand.
For this example, play a C major chord (as
shown below).
For information on how to enter chords, see
"Playing Auto-accompaniment Chords" on
page 25.

Setting the Split Point

The initial default split point is key number 54 (the F#2 key), but you can change it to another key using the
procedure described below.
1
Press the [UTILITY] button to go to the
UTILITY display.
2
Use the CATEGORY [DEC] / [INC] but-
tons to select the Split Point item.
52
MM6/MM8 Owner's Manual
Split Point
Accompaniment
Range
7
Press any of the main section buttons,
[A]–[D], as required.
A fill-in will play, leading smoothly to the
selected main section.
3
Use the dial to set the split point to any
key from 000 (C-2) through 127 (G8).
Split point (54 : F#2)
Split Voice
NOTE
• When you change the split point the auto-accompaniment split point
also changes.
• The split voice sounds when the split-point key is played.
Main Voice