Changing The Split Point - Yamaha P-150 Owner's Manual

Moving the slider upwards increases the level of the main voice while decreasing
the level of the sub voice. Conversely, moving the slider downwards increases the
level of the sub voice while decreasing the level of the main voice. You can set the
balance to any value between -16 and 15. Two indicators to the right of the
numeric value display the relative balance of sub and main voices.
2. Release the [BALANCE] button.
After a moment, the Split voice names will reappear in the screen.
If you choose different Split voices, the balance relationship will remain the
same as determined above, until you change the balance setting again.

CHANGING THE SPLIT POINT

Hold the [SPLIT] button and press a key on the keyboard.
1.
The key that you press will become the new split point. The SPLIT POINT
screen appears.
As long as you hold the [SPLIT] button, the note name of the key that you
pressed will blink; pressing another key will change the split point still again,
and the name of the new split point will likewise appear in the screen.
You can also raise or lower the current split point setting one semitone at a
time by holding the [SPLIT] button and pressing the [–1/NO] or [+1/YES]
buttons.
SPLIT
BALANCE
+
(G3)
SPLIT POINT QE
G 3
31
In this case you cannot use the
[–1/NO] and [+1/YES] buttons to
change data.