Yamaha MM8 Owner's Manual page 31

◆ Pattern Track Selected for Recording
Press the TRACK [PATTTERN] button while holding down the [TRACK
SELECT/MUTE] button.
The pattern track will be highlighted and the record standby mode will be
engaged.
Press and Hold
◆ Changing the Pattern Being Recorded
Press the [PATTERN] button and use the dial to select the desired pattern.
Once the pattern has been selected press the [EXIT] button.
4
Recording will start when you play on the keyboard.
You can also start recording by pressing the [START/STOP] button.
Press the [EXIT] button, and the measure number will be shown in the
Main display.
5
Stop recording by pressing the [START/STOP] or [REC]
button.
When recording stops the current measure number will return to 001
and the recorded track numbers in the display will appear with a frame
around them.
Pattern track highlighted.
Current measure number
Start recording
Recording Your Own Performance
NOTE
• To cancel recording to a
selected track, press that track
button a second time. The FIN-
GER mode cannot be turned on
or off once you have started
recording.
NOTE
• If the memory becomes full dur-
ing recording a warning mes-
sage will appear and recording
will stop automatically. Use the
song clear or track clear func-
tion (page 33) to delete
unwanted data and make more
room available for recording,
then do the recording again.
MM6/MM8 Owner's Manual
31