Applying Dsp Effects - Yamaha MM8 Owner's Manual

Enhancing the Sound with Reverb, Chorus, and DSP Effects

Applying DSP Effects

These effects can be used to add depth and richness to voices played on the keyboard (main, dual, and split
voices). Only one DSP type can be selected.
NOTE
• DSP stands for "Digital Signal Processor", which is a special micropro-
cessor designed to process and add effects to digital audio signals.
1
Press the [UTILITY] button to go to the
UTILITY display.
2
Use the CATEGORY [DEC] / [INC] but-
tons to select the DSP ON/OFF item.
3
Use the dial to set the DSP ON or OFF
as required.
44
MM6/MM8 Owner's Manual
DSP On/Off Item
■Changing the DSP type
1
Press the [UTILITY] button to go to the
UTILITY display.
2
Use the CATEGORY [DEC] / [INC] but-
tons to select the DSP Type item.
The currently selected DSP type is displayed.
Dsp Type Item
3
Use the dial to select a DSP type.
You can check how the selected chorus type
sounds by playing on the keyboard.
Refer to the DSP Type List on page 101 for the
available DSP types.
The Selected DSP Type
Press the [INC/YES] and [DEC/NO] buttons
simultaneously to recall the initial default
value.
● ● ● ● ● ● ● ●